With the development of the advertising industry, luminous characters can be seen everywhere, and the types are also increasing. When making luminous characters, how to make the luminous characters better? In addition to the strict operation of some large processes, people should pay special attention to some small details. It takes different time to make a luminous character according to the different production process. However, if the preparatory work can be done well, a fully functional luminous character can be produced quickly under the work of skilled workers.
Generally speaking, the production of luminous words mainly includes the following steps and procedures:
1. One of the links in the production of luminous characters is the use of computer programs to make text models. This step can also be called design work. In this production process, people can use some drawing software to complete the corresponding work. When the design work is finished, the next step is cutting and forming. Now people are more commonly used is the cutting method is laser cutting method, especially in the production of acrylic panels, is more than this method. After doing this work, the next step is welding and bonding.
2. The welding and bonding of luminous characters are also determined by the manufacturing process. If it is stainless steel luminous word or iron sheet luminous word, it is the welding process of stainless steel or iron sheet edge strip by argon arc welding technology. If you need to make a whole body light-emitting words or aluminum plastic luminous words, it is to use a special adhesive to bond the edge and the panel. Then install the light source and wiring, and then install the bottom plate. At this point, there is only one left in the whole working procedure: install luminous words in corresponding places.
In many cases, some people do not pay enough attention to the details, resulting in the whole luminous character after the production of the effect is not very ideal, in the use of such and other problems. So what are the details of luminous character production?
1. One of the details in the production of luminous characters is the welding of enclosure structure. Different welding process may result in different welding results. If the solder joint is not well treated, it will cause some trouble to the next polishing work, thus affecting the appearance of the whole luminous word.
2. In addition to welding, people should pay special attention to the sealing when bonding the panel to the enclosure. Apply the silicone evenly around the font, leaving no gaps.
After using for a period of time, some people found that there was a problem with the luminous words in the rain and snow weather. Because the interior light source was affected by the humid air, it did not emit light any more. It is likely that the sealing problem was not handled properly.
Then, during the production of luminous words, special attention should be paid to the installation of light source. Now people often use LED light source, which has strict requirements for voltage and power supply, which is also a detail problem that people should pay attention to.
The above is about the details of the production process of luminous characters, hope to help you, if you want to know more, welcome to click Jinan luminous characters http://www.jnfaguangzi.com Website.