In the production of acrylic light-emitting words will be commonly used in the box?
Red morning advertising strong technical force, advanced production facilities, special team, for the manufacture of excellent products laid a good foundation, excellent products, excellent service won the majority of customers praise. Then, let's introduce it again: the box used to make acrylic luminous characters.
Class I: ordinary mode luminous box, the selection of materials are cold-rolled sheet, aluminum plate, stainless steel plate, galvanized sheet.
(1) It is recommended that Nippon should use 0.8mm thick cold rolled sheet and 1mm thick cold rolled sheet should be used on the bottom surface of the luminescent box which is usually less than 1.5m (lengthening meter).
(2) For the luminescent box with size more than 1.5m (lengthening meter), Libang uses 1.2mm-thick cold-rolled plate, and the bottom surface of the box uses 1.5mm-thick cold-rolled plate.
When the bottom surface is welded with Nippon, spray paint or bake paint. The height of Nippon is generally 10-12mm (this mode is mostly used outdoors, and the visual distance is more than 20m).
Class II: fine mode luminous box, the selection of materials are cold-rolled sheet, aluminum plate, stainless steel plate, galvanized sheet. The difference between the production process of the production process and the ordinary mode is that the box body adopts fine spot welding, multiple grinding and polishing treatment, and then carries out dust-free paint baking. The painting process is the same as that of automobile body painting.
The above is about the production of acrylic light-emitting characters in the process will be commonly used in the introduction of the box, I hope to help you, if you want to know more about the content, please click the website Jinan acrylic luminous words http://www.jnfaguangzi.com 。