悬浮窗
悬浮窗
QQ咨询
电话联系
13075398219
扫一扫
二维码
您好,欢迎访问山东红晨广告传媒有限公司,主要业务:济南亚克力发光字,形象墙发光字,吸塑发光字,冲孔发光字等广告制作
咨询热线:13075398219
您现在所在的位置: 首页> 新闻资讯 >

济南吸塑发光字门头招牌制作的三个常识!

所属分类:新闻资讯 发布时间:2020-11-18 来源:http://www.jnfaguangzi.com/ 浏览量:

吸塑发光字门头招牌制作的三个常识!
Three common sense of the production of blister luminous word doorhead signboard!
很多店家在找吸塑发光字门头招牌制作的时候不知道如何才能让吸塑发光字门头招牌达到找到效果,这与吸塑发光字门头招牌制作的过程有关,一般广告公司为了保证吸塑发光字门头招牌制作的质量都有一些制作的注意事项,接下来就由小编带大家来了解一下吸塑发光字门头招牌制作的三个常识吧。
Many shop owners do not know how to get the effect when they are looking for the production of blister plastic luminous character signboards. This is related to the production process of blister plastic luminous character signboards. In order to ensure the quality of the production of plastic light-emitting signboards, general advertising companies have some matters needing attention. Next, we will take you to understand the blister The three common sense of the production of luminous character signboard.
一、防水挡板的安装
1、 Installation of waterproof baffle
吸塑灯箱体本身的防水在此不多说,现在绝大多数的吸塑灯箱使用不了多久吸塑灯箱面就会很脏,尤其是白色灯布为主体的“阳版吸塑灯箱”,如中信银行,因为现在空气质量差,空气中粉尘多,一下雨就会形成“黑水”从吸塑灯箱顶部往吸塑灯箱面流,时间一长根本就洗不干净,因此建议中高档吸塑灯箱的制作顶部做成略往后倾斜的结构,可者用铝板不锈钢板做成一种向外向后的“檐板”,逢下雨就会把水引向事先预留的导流处,最大限度减少脏水污染吸塑灯箱面。
The waterproof of the blister lamp box itself is not much to say here. Now most of the blister lamp boxes will be very dirty soon after they are used. Especially for the "positive type Blister light box" with white lamp cloth as the main body, such as CITIC Bank, because the air quality is poor and there is a lot of dust in the air, once it rains, the "black water" will flow from the top of the blister lamp box to the surface of the blister lamp box for a long time It is not clean at all. Therefore, it is suggested that the top of medium and high-grade blister lamp box should be made into a slightly backward inclined structure, but aluminum plate and stainless steel plate can be used to make a kind of outward backward "cornice". When it rains, the water will be directed to the pre reserved diversion point, so as to minimize the pollution of dirty water on the surface of the blister lamp box.
           济南吸塑发光字
二、亮度的调节
2、 Adjustment of brightness
吸塑灯箱内的灯管离吸塑灯箱机太近会从外面看得见灯管呈“排骨”状,如果太远则吸塑灯箱的亮度会降低,一般来说较大的吸塑灯箱灯管离吸塑灯箱面10cm左右即可,当然,因为不同品牌的透光膜\灯布的透光度不同,因此灯管距吸塑灯箱面的最佳距离也会有所不同,建议制作前打个小样测试一下。
Of course, if the lampbox is too far away from the outside of the lampbox, it will reduce the light transmission of the lampbox Also, it is suggested to make a small sample for testing before making.
三、距离的控制
3、 Distance control
吸塑灯箱的亮度首要取决于灯具的质量和排布的密度,也与灯布贴膜的质量有关,当然还与其它因素有关,比方说,尽量把灯光密闭关起来,即吸塑灯箱要做背板,建议用镀锌板做背板,可以起到漫反射有一定的加强光照的作用,如果想光亮度更强,则建议在背板上先贴一层艾利增光膜,再安装灯具。
The brightness of the blister lamp box mainly depends on the quality of the lamp and the density of the layout, and also related to the quality of the lamp cloth film. Of course, it is also related to other factors. For example, the light should be closed as far as possible, that is to say, the back plate should be made of the blister lamp box. It is suggested to use galvanized plate as the back plate to diffuse reflection and strengthen the illumination. If you want to have a stronger brightness, it is recommended to use the back plate First paste a layer of Ellie Zener film, and then install the lamp.
以上就是关于吸塑发光字门头招牌的三个常识介绍,希望对大家有所帮助,如您想要了解更多资讯内容请点击网站:济南吸塑发光字http://www.jnfaguangzi.com
The above is about the plastic luminous word signboard three common sense introduction, hope to help you, if you want to know more information, please click the website: Jinan blister luminous word http://www.jnfaguangzi.com 。
热门产品 / HOT PRODUCT
首页 产品 电话 置顶